vene09

My 05 zx6r has the original set up for the headlights witch i think its dumb, one side is a low beam and the other a high beam, alot of ppl modify them so that both run at the same time as low, anyone here done something like this? or know of someone that could do this?

r1bran

Kawiforums.com

Register and search

Back Of The Pack

normanrc51

But also remember that on the side that is the brights, the way the bulb is angled in the housing is slighty different for it to be a bright. Also the reflective coatings inside might be different from side to side. I am not sure if Kawis are different on this part. But something to search and make sure you want to go that route.

TijuanaTaxi

Or just remember "Google is your friend" http://www.kawiforums.com/how-tos-fa...me-time-5.html

r1bran

Good work
If you ask questions like this on any of the national forums without thoroughly searching for a thread pertaining to your question you first wont get an answer and when the jackholes come along they will just flame you and you still wont get your answer.

FYI

whitedevil

last I checked, this isn't any of those forums.... doing research is one thing, but a question was asked. I understand what you mean, I have seen it out there, but we got others to flame on lol.

vene09

FYI i know, i em register with kawiforums but thanks for your help anyways,

and yeah i done plenty of reserch online, but my question was if any one HERE and done something like that or know anyone local that could do it.

TijuanaTaxi thanks for the link to that thread, i hadnt ran into that one yet.

hotrod55

I did it on my 06 when i had it, it worked good. Like everyone said, do your homework then do it.

turbolq4

r1bran

Thanks for checking Don. Not really necessary since I didnt say that BRN is a national forum. I was nicely trying to say if you wanna know how to do something that is specific to a manufacture you should look where the information is abundant. What are there 1 or 2 other 636s on here?
Since your feeling so much like protecting and nurturing people from reality I was wondering what kind of tires to get and what kind of oil should I get? Can anyone help me with that? I wasnt sure where I can find that info.....

whitedevil

Research it, check with your manufacturer....

LOL - I use Castrol from Cycle Queer for the street, but Honda Oil for the dirt. As for tires, I only use Metzlers and don't have much exp with other brands for street. Dirt Maxxis is what I have, IT's but next I am using Desert IT's.

r1bran

Its futile being pissed at you!

whitedevil

LOL! For some it's real easy and can be fun to be mad at me. Hell I get mad at me just cause.

As for headlight conv. I was really wanting to do this too, but I am thinking of having both sides low beam, and both sides hi-beam.... Gonna go do some research now....No sense asking anyone...

Ming

don't do it.
the 636's look gangsta with the single sided light! dual lights look old school IMO. but too each his own i guess...

vene09

you think?, i just hate when ppl tell me hey one of your light is out,

Ming

yeah the single light is where its at.
people that are ignorant enough to think you have a light out, don't know jack squat about bikes. i just laugh and go along with my business, mostly if the squid that say it is on a katana (or insert any inexpensive wannabe sportbike here).

Liteone

Do do it!
The one side uneven light, light thing looks GHEY!

Ming

again too each his own, but dual lights are fuckin' 90's. that shit is out like clout. single side lights are the new style. dual lights look like late 1990 to early 2000 kawi's and yamahammers... may have been cool back in 98, but hey, mullets used to be cool too.

Liteone

that's why It need to be 3. one center on low beam. and, the devil horns come on when You hit the high beam switch.

vene09

well after lots of searching i found this guy that was making kits for the 636's, just installed it last night, low beams are on all the time flip the switch lows go off highs come on i personally like it, better visibility, better looks, dont care if it make it look old, i like it,

the guy makes kits for some cbr 2 anyone interested here is his email [email protected] his name is Adam Khan,

Attached Images

	bikes 017.jpg (87.5 KB, 7 views)
	bikes 021.jpg (101.2 KB, 6 views)
	bikes 022.jpg (80.7 KB, 7 views)
	bikes 024.jpg (96.9 KB, 8 views)

shaner

If you don't mind me asking, how much was that kit?

vene09

its cool man, i got it for 65 ship, but idk for the other models,

shaner

Damn, I'm thinkin I need to get in that business. Sell $20 worth of stuff for $65? Hell yeah! Looks good though.

vene09

thanks, ya its a simple kit, i just dont have time to go look for parts an all that good stuff, its easy for me to just pay a lil bit more and get her done,

shaner

I totally get that. Wasn't trying to trash on you. I've done the same thing plenty of times.