Stainless steal lines in Boise?

PoltArt · 08-12-2012, 07:59 PM

I need a new setup for my Z1000. I know of the shop in donwtown, not sure if it was called Andy's? Either way I was wondering if anyone knows of anyone else around here that makes stainless steal lines maybe in different color options?

I was also looking for a specific line to be made. One that splits into two.

Here is an example.

normanrc51 · 08-12-2012, 08:29 PM

Check out fluid connectors on overland next to Coke. But i found that Andy's is a little cheaper then them.

Dwarrior62 · 08-12-2012, 08:30 PM

We make them.
Dennis

PoltArt · 08-12-2012, 08:37 PM

Dennis, do you by any chance have different colored hoses? I was looking to get maybe blue or white with a black connector.

JJSPRINT · 08-12-2012, 08:43 PM

Quote:

Originally Posted by Dwarrior62

We make them.
Dennis

Dennis question in the state of idaho u have to stamp your line and.be idaho certified by the d.o.t. Are you?

Dwarrior62 · 08-13-2012, 08:47 AM

Nope, our lines are made for track use only. I'm unaware of this rule, but then again I don't sit around reading Idaho DOT laws, to busy building race bikes for that.

If you need a DOT line we would be more than happy to sell you a Spiegler kit that comes in a aray of colors.

Ryan@IdahoSportBikes · 08-13-2012, 10:11 AM

I believe you can have Galfer custom make lines.

scooterholic · 08-13-2012, 11:35 AM

I guess my bike will turn into a race bike when I have my lines done

JJSPRINT · 08-13-2012, 02:07 PM

I say this cause if u make a "set of lines" for said customerr(s). They go out riding that brake line leaks due to an improper crimping. You can be held resonsible for any and all damages

RedStar · 08-13-2012, 02:46 PM

lol. Some comments in here are very funny.

Bluesrider1 · 08-13-2012, 04:41 PM

Quote:

Originally Posted by RedStar

lol. Some comments in here are very funny.

08-12-2012, 07:59 PM	#1
PoltArt Zombie Joined: Nov 2009 From: Meridian, ID Posts: 893 I Ride: Wheelies	Stainless steal lines in Boise? I need a new setup for my Z1000. I know of the shop in donwtown, not sure if it was called Andy's? Either way I was wondering if anyone knows of anyone else around here that makes stainless steal lines maybe in different color options? I was also looking for a specific line to be made. One that splits into two. Here is an example.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-12-2012, 08:29 PM	#2
normanrc51 Mr. Balloon Hands Joined: May 2008 From: Boise Posts: 806 I Ride: 2007 Midnight Warrior	Check out fluid connectors on overland next to Coke. But i found that Andy's is a little cheaper then them.

08-12-2012, 08:30 PM	#3
Dwarrior62 Ditch Missle Joined: May 2010 From: Nampa, ID Posts: 142 I Ride: 2008 Street Glide, 1980 GS250, 1998 Fatboy, 1977 Shovel, 1997 F3, 2005 Roadking, 2004 Aprilla RSV(Track Only)	We make them. Dennis

08-12-2012, 08:37 PM	#4
PoltArt Zombie Joined: Nov 2009 From: Meridian, ID Posts: 893 I Ride: Wheelies	Dennis, do you by any chance have different colored hoses? I was looking to get maybe blue or white with a black connector.

08-13-2012, 08:47 AM	#6
Dwarrior62 Ditch Missle Joined: May 2010 From: Nampa, ID Posts: 142 I Ride: 2008 Street Glide, 1980 GS250, 1998 Fatboy, 1977 Shovel, 1997 F3, 2005 Roadking, 2004 Aprilla RSV(Track Only)	Nope, our lines are made for track use only. I'm unaware of this rule, but then again I don't sit around reading Idaho DOT laws, to busy building race bikes for that. If you need a DOT line we would be more than happy to sell you a Spiegler kit that comes in a aray of colors.

08-13-2012, 10:11 AM	#7
Ryan@IdahoSportBikes Dr. Evil Joined: Jun 2006 From: Boise Posts: 3,109 I Ride: R6	I believe you can have Galfer custom make lines.

08-13-2012, 11:35 AM	#8
scooterholic Keyboard Ninja Joined: Oct 2009 From: Nampa, Id Posts: 1,700 I Ride: Suzuki 01 Gsx 600 f, 07 Honda Reflex, 92 Ninja ZX7 (in bike coma) Weedeater one	I guess my bike will turn into a race bike when I have my lines done

08-13-2012, 02:07 PM	#9
JJSPRINT Grasshopper Joined: Mar 2009 From: Boise, Id Posts: 588 I Ride: 2- F4i's	I say this cause if u make a "set of lines" for said customerr(s). They go out riding that brake line leaks due to an improper crimping. You can be held resonsible for any and all damages

08-13-2012, 02:46 PM	#10
RedStar Your Mom Joined: Apr 2010 From: Atlanta GA Posts: 1,292 I Ride: 03 636, 04 636	lol. Some comments in here are very funny.