delkevic pipe vs yoshimura - Page 2

romo23 · 03-07-2010, 10:52 PM

Quote:

Originally Posted by R1DON

this cant end well.

that was confidence inspiring. lol.

m5james · 03-07-2010, 11:56 PM

You'll wanna come by and watch out brains explode!

romo23 · 03-08-2010, 11:19 PM

ok well after reading and asking around on the sv forums heres what i need, like i said i dont know much about carbs so someone needs a technical decoder ring for this.

17.5 Pilots
A/F screw at 2.5 turns (to start)
152.5F/155R - If it's the new style K&N
147.5F/150R - If it's the old style K&N
One Shim under the needle

so if anyone can help me lemme know A) where i can buy this stuff and B) what kind of beer you like

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-07-2010, 11:56 PM	#42
m5james Senior Member Joined: Sep 2007 From: Kenmore, WA Posts: 838 I Ride: 01 TL1000R	You'll wanna come by and watch out brains explode!

03-08-2010, 11:19 PM	#43
romo23 Senior Member Joined: Sep 2009 From: caldwell, idaho Posts: 237 I Ride: 2001 sv650	ok well after reading and asking around on the sv forums heres what i need, like i said i dont know much about carbs so someone needs a technical decoder ring for this. 17.5 Pilots A/F screw at 2.5 turns (to start) 152.5F/155R - If it's the new style K&N 147.5F/150R - If it's the old style K&N One Shim under the needle so if anyone can help me lemme know A) where i can buy this stuff and B) what kind of beer you like